WAGO 750-634 INCREMENTAL ENCODER INTERFACE MODULE

WAGO 750-634 INCREMENTAL ENCODER INTERFACE MODULE (NEW OPEN BOX)

WAGO
750-634
INCREMENTAL ENCODER INTERFACE MODULE
24 V

THIS MODULE IS AN INTERFACE FOR INCREMENTAL ENCODERS WITH STANDARD CONNECTIONS. A COUNTER WITH QUADRATURE DECODER AS WELL AS A LATCH FOR THE ZERO IMPULSE CAN BE READ OR ENABLED BY THE CONTROLLER. THE CONTROLLER CAN SET THE COUNTER OR TRANSMIT THE COUNTER VALUE TO THE LATCH. DEPENDING ON THE OPERATING MODE, THE COUNTER VALUE IS ADDED TO THE LATCH REGISTER ON A POSITIVE EDGE AT THE “C” OR “LATCH” INPUT.

THE RATE (INCREMENTS/MS) IS AUTOMATICALLY ACQUIRED AND CAN ALSO BE TRANSMITTED TO THE CONTROLLER AS AN ALTERNATIVE TO THE LATCH VALUE.

A COUNTER LOCK-OUT IS POSSIBLE USING THE “GATE” INPUT. INPUT “REF“ CAN BE USED TO ACTIVATE THE INITIAL POINT “C“ FUNCTION.

THE CAM OUTPUTS N1 AND N2 INDICATE WHETHER THE COUNTER VALUE IS WITHIN A DEFINED RANGE OF VALUES. THE RANGE CAN BE ADJUSTED.

THE MODULE MUST BE POWERED USING AN EXTERNAL 24 VDC POWER SUPPLY, FROM WHICH POWER TO THE TRANSMITTER (UI, U0) CAN ALSO BE DERIVED.

REF: FKM2276A11