SIEMENS CERBERUS PYROTRONICS CP-35 UNIVERSAL ALARM CONTROL SYSTEM 3

SIEMENS CERBERUS PYROTRONICS CP-35 UNIVERSAL ALARM CONTROL SYSTEM 3 (NEW OPEN BOX)

SIEMENS 

CERBERUS PYROTRONICS

MODEL: CP-35 

580-184872-16

UNIVERSAL ALARM CONTROL

TYPE: F

SYSTEM 3

MC1368C

MULTI 1

94V-0

SPECIFICATION:

• BASIC TWO ZONE SYSTEM 

• EXPANDABLE 

• DOUBLE SUPERVISION 

• GROUND DETECTION 

• SUPERVISED ALARM RELAY COIL

ALARM:

THE CONTROL PANEL ALARM SECTION CIRCUITRY RESPONDS TO ANY ZONE MODULE ALARM INPUT SIGNAL EITHER FROM THE ON-BOARD ZONES OR SEPARATE ZONE MODULES. THE ALARM CONDITION IS “LOCKED IN” WITHIN THE CONTROL PANEL AND IS CLEARED ONLY BY OPERATION OF THE CONTROL PANEL “RESET” SWITCH. AN ALARM CONDITION IS INDICATED BY: 

1. CHANGE OF STATE OF THE TWO SPDT ALARM RELAY CONTACTS. 

2. ILLUMINATION OF THE PANEL “ALARM” VISUAL INDICATOR. 

3. ENERGIZING OF BOTH THE SILENCEABLE AND NON SILENCEABLE ALARM

    OUTPUTS. 

4. HIGH GOING CURRENT-LIMITED ALARM SIGNAL. 

5. ALARM SIGNAL OUTPUT TO THE REMOTE ALARM AND SILENCE STATION.

    OPERATION OF THE MOMENTARY “ALARM SILENCE” SWITCH CAUSES BOTH

    THE SILENCEABLE ALARM OUTPUT TO DE-ENERGIZE AND THE VISUAL ALARM

    INDICATOR TO FLASH. 

POWER REQUIREMENT: 120/240 VAC, 50/60 HZ, THREE-WIRE

REF.NO: FKM5008P103